Q6600 Oc

Status
Not open for further replies.

Rmgdx

Baseband Member
Messages
65
nnnnc.png



What should I set my vcore to?
 
Just bump it up to the next level (when I say one level I mean the smallest amount it will let you move it.) . Then retest with prime. If it errors again bump it up one more level until you get it stable.

Keeping an eye on temps of coarse as you bump the vcore.

what works for one cpu may or may not work for yours. You have to keep playing to have the minimum vcore that gives you stability.
 
somewhere around 1.32. Some bios versions let you input an actual number while others only give you a list of voltages to choose from.
 
pretty sure I did it right, but when i ran prime 95 comp reset as soon as it started.

I reset the bios set it back to 3.3 with the old vcore and tried it, reset 30 sec in to prime.


currently back to 3.0, should I just call it good? :p
 
for sure he'll need more vcore, make sure to watch the temps and you also might try increasing the NB voltage some as well
 
Status
Not open for further replies.
Back
Top Bottom