New Computer Build

Status
Not open for further replies.
If you are concerned about the heatsink fitting in your case it fits into an antec 900 which has 1/2 inch less width than your case.
 
Thanks, and i asked someone and he said the acrylic case was bad because it kept heat do you think with my CPU fan and 4 80mm fans that it would be ok.?
 
That will make a big difference. Put the top fan ("blowhole") and rear fan as exhaust, and the front/side fan(s) as intake and you should be good to go.

Acrylic doesn't allow heat to transfer through the case as well as metal does. Your fans will be the only way for the heat to be removed.
 
Ok thanks, but would you recommend going water cooling and Fan if that is even possible and if so what should i get or a guide. (sorry i cant find a guide on water cooling)
 
Hey i Finished building my computer except sense its a clear case i have about 5 wires bunched up useless. and i was wondering about those PSU's that have removable cords can anyone recommend one (My computer is based on a red color)

or can i cut the unused wires off?
 
Status
Not open for further replies.
Back
Top Bottom