If I were to do a gallery, I would want to host it myself. I don't like leaving galleries open on PB
Edit:
Someone on [H] mentioned to me about the very small clearence between the windows and that little lip on the edge of the back of the case, see green arrow here:
I've mounted the window temporarily on the top panel... and there does seem to be a lack of space..
This is a problem... Potentially you could trim either your plexi/lexan and or that edge piece.. Hoo boy. This should be fun to find a way to over come. :|
Here's some quick pics of taping the holes that I did tonight.http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09908_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09912_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09914_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09918_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09919_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09922_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09925_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09926_576x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09927_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09928_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09929_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09931_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09937_1024x768.jpg
After some thinking, I think i'm just going to trim that edge of the case.On the SG01 its a solid piece unlike the picture I posted with the tabs, which really don't do too much anyway as far as I can tell. I think they're just there to keep the outer shell tight against the case. On the back that shouldn't be much of a problem, as there are 4 screws to hold it tight in place.
So I would be cutting long the red lines here:
Edit:
Someone on [H] mentioned to me about the very small clearence between the windows and that little lip on the edge of the back of the case, see green arrow here:
I've mounted the window temporarily on the top panel... and there does seem to be a lack of space..
This is a problem... Potentially you could trim either your plexi/lexan and or that edge piece.. Hoo boy. This should be fun to find a way to over come. :|
Here's some quick pics of taping the holes that I did tonight.http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09908_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09912_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09914_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09918_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09919_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09922_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09925_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09926_576x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09927_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09928_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09929_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09931_1024x768.jpg
http://i7.photobucket.com/albums/y288/hybridchemistry/Sun Tzu/Sun_Tzu_Deux/DSC09937_1024x768.jpg
After some thinking, I think i'm just going to trim that edge of the case.On the SG01 its a solid piece unlike the picture I posted with the tabs, which really don't do too much anyway as far as I can tell. I think they're just there to keep the outer shell tight against the case. On the back that shouldn't be much of a problem, as there are 4 screws to hold it tight in place.
So I would be cutting long the red lines here:
