So I've done some basic overclocking on my asus board with an athlon x2. To do this I just upped the FSB, but now I have a biostar Tforce 128m and a phenom II x3 720 black edition. Not sure whether to OC with FSB, or use the unlocked multiplier, or both.
This bios was a little different and seemed a little more confusing. I had to enable a few things to actually get to the next menus that I will post below. Also, in cpu-z it says multiplier is at 4, in bios it said it was at 14.0.
These are the seperate menus I got---
CPU/HT reference clock [200] (200-600mhz)
Is that the FSB I would need to up to OC??
or another menu,
CPU FID/VID control
( I had to enable something in this to get the next drop down menus to come)
Core FID [x14.0 2800mhz] Is this the mutliplier? It says 14, whereas cpu-z says x4.
Core DIP [divided by one]
Core VID [1.2500 v]
NB FIP [1600 mhz] I assume I don't need to up that??
Sorry guys, a bit new to Overclocking. All help is appreciated, thanks in advance.
This bios was a little different and seemed a little more confusing. I had to enable a few things to actually get to the next menus that I will post below. Also, in cpu-z it says multiplier is at 4, in bios it said it was at 14.0.
These are the seperate menus I got---
CPU/HT reference clock [200] (200-600mhz)
Is that the FSB I would need to up to OC??
or another menu,
CPU FID/VID control
( I had to enable something in this to get the next drop down menus to come)
Core FID [x14.0 2800mhz] Is this the mutliplier? It says 14, whereas cpu-z says x4.
Core DIP [divided by one]
Core VID [1.2500 v]
NB FIP [1600 mhz] I assume I don't need to up that??
Sorry guys, a bit new to Overclocking. All help is appreciated, thanks in advance.