Did I fry my mobo?

Status
Not open for further replies.

kdubble4

Beta member
Messages
2
Today i was cleaning out the dust from the inside of my computer. I took out the 2 sticks of ram to show my friend and put them back in. apparently i didnt snap 1 of them all the way into place. i turned on the computer and i smelt a very faint smell of that frying electronic smell..i opened it and realized the ram wasnt all the way in fixed it and now my computer wont start. it turns on the fans spin i see a light thats lit on the mobo but the monitor stays black. is it possible i unplugged something when i was cleaning or is my mobo fried? wat do i do this is aweful!
 
recheck all of your connections. reseat your ram. after that try with just one stick of ram in different slots.
 
i tried different combinations of putting the ram in diff slots and just using 1 stick and none of em work, black screen

must be the mobo, tried a diff graphics card still no display
 
have you tryed taking the stick of ram that wasnt in properly and just useing one? see if that works

try it in a diffrent slot not the one that the ram wasnt in properly

even though hefemeister allready mentioned it lol
 
Status
Not open for further replies.
Back
Top Bottom