upshutdown
Solid State Member
- Messages
- 13
- Location
- So cal
Hey all...problem that is stumping me...so i just got a computer upgrade as follows
9800GTX+
core 2 duo processor 2.8 GH model number e7400
and 2 slots of 2 gig ddr2 ram
i already have a 550 watt power supply and MSI p965 platinum motherboard
i am almost 100 percent sure all this is sufficient
so my problem is, i start up my comp and the initial MSI loading screen comes up...It tells me all the usual:
Motherboard make, then processor installed, Press DEL to run Setup, Press F11 for BBS POPUP, The MCH is operating with DDR2 CL5/Trcd5/Trp5/Tras12, Initializing USB controllers .. Done.
4096 MB OK
then it just stays there...does not let me enter setup, does not continue...any ideas what could be wrong?
9800GTX+
core 2 duo processor 2.8 GH model number e7400
and 2 slots of 2 gig ddr2 ram
i already have a 550 watt power supply and MSI p965 platinum motherboard
i am almost 100 percent sure all this is sufficient
so my problem is, i start up my comp and the initial MSI loading screen comes up...It tells me all the usual:
Motherboard make, then processor installed, Press DEL to run Setup, Press F11 for BBS POPUP, The MCH is operating with DDR2 CL5/Trcd5/Trp5/Tras12, Initializing USB controllers .. Done.
4096 MB OK
then it just stays there...does not let me enter setup, does not continue...any ideas what could be wrong?