Evolv
AKA , gt7sanremo
- Messages
- 1,240
- Location
- Harrisburg,PA
His board supports only 1333 speeds.
My memory timings and frequency
- Thread starter cnico88
- Start date
- Status
thirdshiftdj
I feel funny...
- Messages
- 3,808
- Location
- Lowell,Ma
# Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
# Support for DDR3 1600 MHz, DDR3 1333 MHz, DDR3 1066 MHz, or DDR3 800 MHz DIMMs
Intel Desktop Board DX48BT2 - Overview
check the bios
# Support for DDR3 1600 MHz, DDR3 1333 MHz, DDR3 1066 MHz, or DDR3 800 MHz DIMMs
Intel Desktop Board DX48BT2 - Overview
check the bios
Evolv
AKA , gt7sanremo
- Messages
- 1,240
- Location
- Harrisburg,PA
Whoops, I was looking at a different board.
Sorry to resurect an old thread, but I just updated the BIOS (so I can install an OS from USB) and now the BIOS doesn't like my memory timings and wants to go to stock (which is way underclocked)
My timings (as Corsair adversises) 9-9-9-24 @1.8 Volts 1333Mhz
Stock Default 7-7-7-20 @1.5 Volts 1066Mhz
with my timings I get BSOD every time I open a large application. Stock is stable as a rock.
Before the BIOS update my timings were also super stable. What can I do?
My timings (as Corsair adversises) 9-9-9-24 @1.8 Volts 1333Mhz
Stock Default 7-7-7-20 @1.5 Volts 1066Mhz
with my timings I get BSOD every time I open a large application. Stock is stable as a rock.
Before the BIOS update my timings were also super stable. What can I do?
- Status
