x2 6400BE vs x2 7750BE

Status
Not open for further replies.
what rail does the cpu pull from? 3.3 or 5?

my psu isnt much better than yours on those rails.
 
Why all the problems getting higher multipliers, and Bus speeds? I have a DFI mobo, and my multiplier in bios goes to 30x. I am running currently a 5000BE at 3125mhz @ 12.5X multiplier, 250mhz Bus, with +0.25 gain@1.392V. Stock is 2600mhz, 13x multi, 200mhz bus, and 1.350V. Always lower your multi before raising your bus, then voltage, then raise your multi. BE cpu's can hit 1300mhz bus...but dont push it. Make sure you have a good PSU aswell.

That 7750 is supposed to hit 4.0ghz no problem, and I will be getting it soon. Don't forget it's based off the phenom core design.
 
Why all the problems getting higher multipliers, and Bus speeds? I have a DFI mobo, and my multiplier in bios goes to 30x. I am running currently a 5000BE at 3125mhz @ 12.5X multiplier, 250mhz Bus, with +0.25 gain@1.392V. Stock is 2600mhz, 13x multi, 200mhz bus, and 1.350V. Always lower your multi before raising your bus, then voltage, then raise your multi. BE cpu's can hit 1300mhz bus...but dont push it. Make sure you have a good PSU aswell.

That 7750 is supposed to hit 4.0ghz no problem, and I will be getting it soon. Don't forget it's based off the phenom core design.

hey there mate, im not sure what you mean by "problems", the only problem i am having is with my mobo not allowing me to touch voltage for the vcore.
(by not allowing i mean if i do, it BSOD)

and with Hussein19891's chip, i think he made it clear his psu was limiting him
 
and with Hussein19891's chip, i think he made it clear his psu was limiting him

You think its possible?

What am I saying lol. I m running crossfire and a 95 watt on a 385 Watt PSU.

But even when I do eventually get a better PSU, I m not holding my breath.
 
Status
Not open for further replies.
Back
Top Bottom