BTW
I have DDR2 RAM I should still be able to run what your telling me right?
ok i set my Cpu voltage to 1.25 and my FSB to 400. now what do i do?
oh and you said to set the "vcore" I didnt see that so I assumed that it was the cpuvol for my motherboard?
yep... vcore is the voltage across the die... if you've got it set at 1.25V and it boots then that's sweet... if it doesn't boot, then put a bit more voltage through the core (try 1.3-1.35V to compensate for the mad droop P45s get), and set the MCH (NB) voltage to 1.2-1.3V... make sure you've got your RAM timings and voltage set manually and run them at the lowest speed (1:1 ratio = DDR2 800) you can for now
uuh how do i set my ram timings and voltage? and how do I know if it didnt boot or not? and for some reason my mch voltage doesn't reach higher than like .60
I see RAM timing options but I dont know what to do because there is so many different things to pick from