New Set of RAM and 750i BIOS Settings

[Viscin]

Well i just got a new kit of RAM Newegg.com - G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory
and I want you guys to help me set up my BIOS Settings for some that I do not know what to set it to.

I have a EVGA 750i FTW, Q6600, 9800 GX2, 700W PSU. I am running this RAM at 5-5-5-15 @ 1000MHz. Take a look at my BIOS

What should CPU FSB voltage be set too? Also I have another 4gb kit Newegg.com - OCZ SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory can I run both of these for 8GB without any problems? Thanks in advance.

 

[tastegw]

Well i just got a new kit of RAM Newegg.com - G.SKILL PI Black 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory
and I want you guys to help me set up my BIOS Settings for some that I do not know what to set it to.

I have a EVGA 750i FTW, Q6600, 9800 GX2, 700W PSU. I am running this RAM at 5-5-5-15 @ 1000MHz. Take a look at my BIOS

What should CPU FSB voltage be set too? Also I have another 4gb kit Newegg.com - OCZ SLI-Ready Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Desktop Memory can I run both of these for 8GB without any problems? Thanks in advance.

what is your operating system

if your not running 64-bit os then dont install the other 4gigs.

im not an expert on this matter, but i like to have all the same sticks (same brand, same model) in my pc's.

 

[Viscin]

o sry forgot to include im running vista 64bit

 

[Viscin]

bump..

 

[Demalii]

-What should CPU FSB voltage be set too?

If you're running a stock cpu, leave that setting alone.

 

[Viscin]

Okay i Changed things up a bit Im running a Q6600 @ 3.2GHZ (8x400) @ 1.41v G.SKill PI at 4-4-4-12 @ 800 MHz and 1.9v Can you tell me what to set the advanced memory timings too?

 

[BongWizard]

its good to have matched pairs/trios because they will be able to OC very similarly to each other and you can run them at their tightest timings as with unmatched setups you can only run at the tightest timings both of them can do (plus you might have to fiddle with the Phase Adjustment to get them properly stable)

as for the timings, 4-4-4-12 is your stock settings, so if you're gonna be running them at 800MHz, those will be the first ones to set... your advanced timings look good to me... you can probably set the tWTR to 8 and the tRC to 21 with a bit more voltage, but they're looking fine in that photo