Rewiring questions.

[Tenenbaum]

I put everything behind the motherboard tray as everyone else does with zip ties and some electrical tape.

The only problem was, there was a lot of wires back there.
Putting the siding back on wasen't hard at all, but I had to push a bit to get it lined with the screws.

Is this bad to have a little pressure? Or should everything be fine?

 

[jfenwick]

the only place you need to watch the pressure is at the connections on the mobo, doesn't matter if the wires get squished, just make sure where they connect to the mobo, that there isn't too much pull/push on those connections and to your other devices.

 

[Tenenbaum]

Most of the stuff in the motherboard is pretty loose.
Whats the most accurate temperature reader?

HWMonitor and Real Temp are giving me different temperatures up to 607C difference.

 

[jfenwick]

I haven't done much OCing in a bit...i usually use BIOS, nvidia monitor for amd/nvidia and core temp for ati.

But others with more exp will probably have better recommendations.