External Hd not being detected help pls

Status
Not open for further replies.

amonkai

Beta member
Messages
1
i am at my wits end. i have a micronet 500gb external HD firewire. the booting chip on it got fried or something and is not being read by the pc. i tried connecting them directly onto the pc as master/slave and to no avail because its a 2 hd 250 combo that was made to be read like 1 500gb. i dont know how to do this. or if it can be done by some type of emulation software that will make them read like just 1 drive.



help please i have 400gb worth of data on it
 
Well since you took out the HD out of its external Enclosure, the HD's could be defective if anything. You might want to get a HD diagnostic tool to verify that your HD's are currently running well.
 
If one of the drives in the RAID 0 array is shot then there realyl is nothing you can do. Are you saying the enclosure you have supports two drives in which you set up a striped array with?
 
Status
Not open for further replies.
Back
Top Bottom