The Official NosBoost300 Overclocking Thread

[BongWizard]

you might be able to get stable at 4.4-4.5GHz if you put 1.65V in it and a ****** through the NB... the temps will be pretty scary (probably around 80-85C loaded), but you should be able to make a 3dmark run on that

 

[Nagasama]

eeee doggers dude blank out the **** in ****load. lol there are kids in here.

 

[Poizen22]

i noticed i couldnt get a stable 3dmark 06 run at 3.9 unless my voltage was 1.51 any higher and it wouldnt go, im counting the vdrop there.

 

[Hussein19891]

Congratulations Poizzen!!!

 

[RichM499]

=P thats funny because i got in trouble for saying dam.

 

[NosBoost300]

ya i ran 1.65 through the vcore for a 3dmark run... it always stopped at the same exact spot... weather i was 1.5 vcore... all the way up to 1.65vcore . I recorded it.. i'll upload the video in a bit

i'll be sure to get the bsod message down so i can eliminate some things

it seemed perfectly stable is what i don't understand... maybe temps went too high...

i'm not really sure... i made sure to eliminate fsb by making the multi 12x...

i'll try again later tonite, my bros on the ps3... and i don't have a secondary monitor that can do 1280x1024.. so i'm screwed.. lol

 

[NosBoost300]

 

[RichM499]

AWESOME can of air duster!

oh, yea,, the rig is decent to, i guess..=P

 

[BongWizard]

have you considered running the WC loop in parallel instead of chaining the blocks up like that... it will reduce the flow over each block there's a theoretical limit depending on the surface area of the block's interior contact area which determines the effect flow can have on the conduction of heat, so a reduction here may or may not hurt you (i cant remember the formula off the top of my head, but i can look it up if you really want me to... i doubt the blocks would have a capacity of more than 12-15L per minute each, certainly not 1500L/h)... it will decrease the temp (pretty significantly i'd guess based on the CPU temps you're seeing) of the coolant that goes through the GPU... so you might get a few more MHz outta that

it looks sick all lit up tho but you really oughta fill out those PCIe slots

 

[Poizen22]

yo you should never clean your lcd with a circular hand motion its very bad for it, up and down please, hate to see a stuck pixel, on such an amazingly wondefull tv, i love mine to death. also thats one problem about desktops on a box wires ahhhh.