Merkwürdigeliebe
Benevolent Cake Despot
- Messages
- 1,733
- Location
- Montreal, CANADA
Hey guys, I'm currently helping out my aunt and uncle in their offices. They have dozens of computers. They're going through an office overhaul and I'm particularly intimidated by the network side of things because the tech guy working there (I think he's been fired or something) has the network set up in a particularly complicated way..
anyway, I have a lot of computer related jobs to do around here.. one thing I wanted to ask, there's a computer that just won't turn on.. I took a look inside and the switch and switch connectors to the motherboard all look fine.. so next I thought the PSU maybe.. I disconnected the power from the psu and noticed that there was a very slow blinking green light that was still lit well after at least a minute from disconnecting the power.. this light was also blinking when the power connector was attached and when I was trying to boot the computer up.. I'm thinking it's fried then.. I'm just not too familiar with being able to recognize a fried PSU, is the light indicating to me that something is wrong? or is that just an indicator for power? I'd try switching the psu, but i just wanna make sure that the psu is in fact dead first..
anyway, I have a lot of computer related jobs to do around here.. one thing I wanted to ask, there's a computer that just won't turn on.. I took a look inside and the switch and switch connectors to the motherboard all look fine.. so next I thought the PSU maybe.. I disconnected the power from the psu and noticed that there was a very slow blinking green light that was still lit well after at least a minute from disconnecting the power.. this light was also blinking when the power connector was attached and when I was trying to boot the computer up.. I'm thinking it's fried then.. I'm just not too familiar with being able to recognize a fried PSU, is the light indicating to me that something is wrong? or is that just an indicator for power? I'd try switching the psu, but i just wanna make sure that the psu is in fact dead first..