soulafien
In Runtime
- Messages
- 128
I bought a new rig and put it together myself (first time)
It's been running for 2wks. took some info off the forums ive been reading and altered the bios. I tried to set the FSB to 400 and in the CPU feature of the bios I disabled everything except the multicore function. Now the system turns on but nothing shows on the monitor. I have tested the monitor and it works fine. I have cleared the CMOS by using the easy clear function as well as the jumpers and its still not working. I then removed one of my 2GB sticks of ram and one of my HD4850's and it still isn't working.
Any help or links to help would be GREATLY appreciated!!!!!
my rig
NXZT Tempest -case
Q6600-cpu
Xigmatek650-psu
4GB G-skill800 -ram
HD4850 x2 in crossfire
stock cpu heat sink
DFI DK x38 t2r
Samsung dvd writer
It's been running for 2wks. took some info off the forums ive been reading and altered the bios. I tried to set the FSB to 400 and in the CPU feature of the bios I disabled everything except the multicore function. Now the system turns on but nothing shows on the monitor. I have tested the monitor and it works fine. I have cleared the CMOS by using the easy clear function as well as the jumpers and its still not working. I then removed one of my 2GB sticks of ram and one of my HD4850's and it still isn't working.
Any help or links to help would be GREATLY appreciated!!!!!
my rig
NXZT Tempest -case
Q6600-cpu
Xigmatek650-psu
4GB G-skill800 -ram
HD4850 x2 in crossfire
stock cpu heat sink
DFI DK x38 t2r
Samsung dvd writer