won't boot with USB hub pluged in

[Refwhett]

My system refuses to start when a USB 2.0 hub in plugged in.
If I plug it out during boot all is well and I can plug it in again after windows loaded. It's not a big problem but alittle annoying to have to look at all the new hardware messeges every time I start the machine.
Any ideas as to why this happens?
Michael.

 

[Alvin.C]

Hello,

Check the boot order in your BIOS to see if bootable USB devices are checkup upon startup.

If you can, either disable the BIOS from checking to see if bootable USB devices are present, or make sure that the hard drive with the OS installed is set to boot first.

 

[KSoD]

Also update your chipset drivers.

 

[Refwhett]

Ok I'll try that next time I boot.
You are probably right.

thx
M.