OC assistance please

[EskimoKing]

My E6300 can run 3.2ghz+ , during winter that is (I'm on air cooling).

Found your problem your using 667 RAM , which won't help your OC and the FSB:RAM is causing your rig not to boot , so raising VCore, shouldn't help...

Making the FSB:RAM 1:1 caused boot failure. Leaving 667 stock and FSB at its current it still boots up fine.

 

[Preacher]

Thats right. That's why you can't go over 2.4ghz, because 333fsb = 667mhz on the RAM , and they cannot boot over that frequency. Hope I helped.

 

[thirdshiftdj]

so underclock your ram

 

[Ste]

Or loosen timmings and increase voltage..