Brunoboy
Baseband Member
- Messages
- 89
- Location
- Gold Coast
On this A8N-SLI Premium board it has 2 chasis fan connectors . I only get readings from connector 1 for some strange reason . This board has also got the connector for the Chip and PSU fan. This board does not have the chip fan as it uses the cool pipe fanless setup . I can connect the second chasis fan to chasis 2, chip or psu connectors and the fans work . Trouble is they are not recognized in the bios and no RPM readings. PC Probe 2 of course does not find them either. Course it would'nt if not picked up in bios. So does this board only give readings for cpu and chasis fan 1 ? My previous A8S-X used to detect all . Is this normal for this board and bios ? Hope some one else here on Tech has experience with this board and can fill me in as this is the first time i've had anything to do with this board. It does say that if Smart Q Fan is enabled that only chasis fan 1 will be automatically controlled. Ok, but surely that should'nt stop the detection and readout of the other fan connectors on the board ! Lokk forward to hearing from ya's, Thanks Brunoboy.