X800 Pro ---> XT PE

Status
Not open for further replies.

ICS

In Runtime
Messages
229
Anyone know a good detailed description of the process and the tools necessary to do it?

Also descriptions of the pencil or tape methods.

Any help would be appriciated.

thanks
 
you cant turn it into an xt . . .

x800 pro has 12 active piplines and x800 xt has 16 . . .

both have 16 pipelines, but pro only has 12 active

you cannot activate the remaining 4
 
Just need to make the connections to the other pipelines. People use to do this kind of thing with pencils cause the graphite is conductive.

I don't have a scematic to show where to use the tape or pencil though. Also, you can easily destroy the card!
 
koldapu said:
you cant turn it into an xt . . .

x800 pro has 12 active piplines and x800 xt has 16 . . .

both have 16 pipelines, but pro only has 12 active

you cannot activate the remaining 4

dont post if you dont know what your talking about... wow

#1

#2

no wonder you have 1300 post, you must do this on all threads
 
i tried, with silver conductive, and I scraped away until I saw copper but later I found out that my card was too new and ati started disabling the ability to do this mod.
 
Status
Not open for further replies.
Back
Top Bottom