Gigabyte 3D Aurora 570 trouble

[almightyobo]

I just got my Gigabyte 3D Aurora 570 in today and I have been fiddling around with it some. I replaced the front intake fake w/ a much sexier and led-less scythe. Getting the front panel off and on was QUITE difficult.

After that I decided to put in my power supply. Well i stuck it up the on the railings but none of the 4 wholes match up at all. I even tried flipping it upside down to see if for some odd reason it ran in reverse, but those didnt match either. Arent psu's and cases supposed to be a universal fit? Oh I should note I am using a PC P&C Silencer 610, it is so sleek and sexy I want to hook it up so bad

any Aurora owners out there?

 

[aspire]

Checking in here.

Yes I know how hard it is to get the front panel on and off. Not sure why it's like that, it just is.

I've found that opening the door when taking it off and on helps out a lot. As does a couple wacks with the palm to get the clips latched on.

Not sure why your having an issue getting the psu holes to match up.

Pics of the back of the psu plz.

EDIT: After taking a look at the stock newegg pictures of my psu and yours, the holes are identical.

Links

http://c1.neweggimages.com/NeweggImage/productimage/17-703-005-03.jpg

http://c1.neweggimages.com/NeweggImage/productimage/17-151-034-02.jpg

You must not be doing something right.

 

[almightyobo]

lol its just four wholes that I have to match up. I know Im not THAT dumb, they must be drilled wrong or something, ill do my best to try and take pictures, but its kind of hard to take a picture of a tiny misaligned hole

Pics:

Back of PSU

Attempt at back of case 1

Attempt at back of case 2

 

[aspire]

Compare to the picture I linked you. If they are the same then your obviously not aligning it right.

http://c1.neweggimages.com/NeweggImage/productimage/11-233-013-15.jpg

compare the back of your aurora to this picture.

If both look the same then it will fit.

 

[almightyobo]

I got it to fit, the wholes drilled in the actual case just arent aligned that great w/ the ones on the psu, with a lil force i got it to fit tho, the writing on the psu also confused me, its reversed when it goes in opposed to what is showed in the picture

 

[commandercup]

please note that its spelled holes not wholes

and lol, I can see all your fingerprints on that case