My system is 4 years old, the most important elements are :
Time of this report: 3/15/2008, 21:53:09
Machine name: TERMINAL
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.070227-2300)
Language: English (Regional Setting: Greek)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 02/25/04 11:27:43 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 385MB used, 2075MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Display Devices
---------------
Card name: Radeon X1650 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor AGP (0x71C7)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_71C7&SUBSYS_22271787&REV_9E
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (70Hz)
Monitor: ViewSonic VG2021m
Monitor Max Res: 1400,1050
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6783 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/26/2008 05:10:53, 299520 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/26/2008 07:51:43, 2863616 bytes
Device Identifier: {D7B71EE2-3287-11CF-486E-2D023FC2CB35}
Vendor ID: 0x1002
Device ID: 0x71C7
SubSys ID: 0x22271787
Revision ID: 0x009E
Revision ID: 0x009E
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Right now i dont remember the ps ( i am at work
) but from the time i installed the new card, my monitor ( 21'' Viewsonic ) started to blink for a few seconds as if trying to find the correct resolution, some games run at a very very low fps and last night i had nero burning a dvd, utorrent for downlodings and i was playing World of WARCRAFT ( with a fps rate arount 9 !) and my system shut down.