AMD Overclocking Thread.

[veg1992]

Re: Official AMD Overclocking Thread.

he's already at 3.3 ghz as well

 

[Peter.Cort]

Re: Official AMD Overclocking Thread.

im gonna get to 3.4

 

[spikoman69]

Re: Official AMD Overclocking Thread.

(Huge Re-Edit)
Right now Im stable, but Im trying to raise my ram up now, and I cant even get DDR 533 with 2.3v. Windows will load, and either flash BSOD and restart, or it just stays black after. DDR400 works flawless at stock volatges.

2950mhz
10.5x multi
281mhz Bus Speed
843mhz HT link speed
1.344v Vcore
cpu/11 FSB/DRAM Ratio
268.2mhz Dram Freq.

Will i notice any difference in performence if i go from ddr400 to ddr533 or 667, which will change the fsb/ram ratio, and up my dram freq to near 400?
Should I try upping me vcore some?
Could my problem possibly be that im running the onboard video? Should i wait to overclock until i get my 8800gs?

 

[Shumway]

Re: Official AMD Overclocking Thread.

Processor: 3000+ venice
Stepping: 2 (?)
Revision: DH-E6
VID: 1.4
Final Clock: 2601mhz
Final Vcore: 1.4

Power supply: Okia 600w
MotherBoard: Asrock939 Dual-VSTA
RAM: OCZ Premier Series
Timmings: 2.5-3-3-7
RAM to FSB: cpu/14
Final RAM Voltage: 2.7

Stress testing program: Prime 95 - Pi - Gaming
Hour of Stability: Lots
Max Load Temparture: 48*
Reason for Stress Test End: Too Long

Heatsink: Arctic Freezer 64 Pro
Thermal Paste: Arctic Silver 5
Lapped Heatsink: nope
Lapped Processor: nope

Can't really tell what other voltages like NB and that are,My mobo only has low-med-high and i'm just too lazy to research

 

[Apokalipse]

Re: Official AMD Overclocking Thread.

Should I try upping me vcore some?

that's what I'd do.
I'm not sure what Brisbane's are like, but I've been able to feed 1.725V to my 6000+

The main issue with that is the heat output. but, I've got a good watercooling system.

 

[Ste]

Re: Official AMD Overclocking Thread.

spikoman69: Post your entry in the format outlined in the first post. Else I will not add your final clock.

 

[spikoman69]

Re: Official AMD Overclocking Thread.

I was more looking for help with overclocking, but Im stable now, so ill post up.

Processor:AMD X2 4000+ Brisbane
Stepping: 1
Revision: BH-G1
VID:1.36
Final Clock:2950mhz (281mhzx10.5)
Final Vcore:1.36

Power supply:Rosewill RP-500 2 500w
MotherBoard:Biostar T-force 7025A
RAM:Wintec Ampo 2x1gb DDR800
Timmings:Stock
RAM to FSB:Cpu/8
Final RAM Voltage:2.25

Stress testing programrime 95
Hour of Stability:6 hours of stressing, about a week of normal gaming/internet
Max Load Temparture: 48c
Reason for Stress Test End:It was long enough?

Heatsink:Stock
Thermal Paste:Stock
Lapped Heatsink:Negative/no
Lapped Processor:Negative/no

Core temp AND CPUZ Screen Shot:

Pic looks bad, cause I converted to .gif in paint. ^^
Voltage Information Picture: Can't Obtain/lazy

Northbridge - 1.27v
Ram - 2.25v
CPU - 1.36v

 

[Apokalipse]

Re: Official AMD Overclocking Thread.

Pic looks bad, cause I converted to .gif in paint. ^^

if you use PNG's, you still get a small file size if there are block colours everywhere.

 

[spikoman69]

Re: Official AMD Overclocking Thread.

Doesnt matter to me really, it still gets the information across to everyone.

 

[Nagasama]

Re: Official AMD Overclocking Thread.

last time i OCed my CPU, i turned down the FSB to 217, n raised the multiplier to 15.5x, giving me 3.33GHz!

BEAT THAT NAGASAMA!

i have my clock at 254 x 13 right now for 3.3 . with 1.375 volts.

i will try tonite to get to 3.4+ and post up results heh heh.

should (theoretically) be as simple as dropping my clock to 243 and raising my ht multi to 14.

i haven't been messing with it much as i have been busy, and it SMOKES at 3.3ghz.