Overclocking problem?

[FeNoM]

Ok I have my new pc so I wanted to see how high I can push my cpu overclocked..obviously I hit something wrong not sure what now my pc doesn't boot
I get 2 beeps and then the fans just spin

The motherboard I have is an error checking board cause the first few times it wasn't stable it reset it self now it doesn't..I left my cmos battery out over night thinking it would clear the OC settings and still same 2 beeps

 

[nOcLuE98]

first off, what are your system specs? mobo, processor, bios, all that jazz. We cant help you unless you give us information to work with

 

[IBM/PS1]

check your MB manual as to what the two beeps mean and go from there. Also try putting a cap on the jumper pins

 

[FeNoM]

* Cooler Master Case 690 (6 120 Fans)
* Apevia Iceberg Power PSU 680 Watts
* Sony Sata DVD burner
* Samsung Light Scribe Burner
* Seagate 200GB Sata HD
* GIGABYTE GA-P35-DS3L
* Intel Core 2 Quad AC Freezer 7 Pro Heatsink and arctic cooling MX-2
* EVGA 8800GT 512mb Video card
* 6 Gigs of Supertalent DDR2 800 ram, and a 512 stick of G Skill

^^ That's my info. Well, I tried the jumpers but haven't tried putting caps on 'em. Will try.