my overclock (amd 3700+ san diego) question

Status
Not open for further replies.
well as you know a PC is all dependent on each part by how it performs. so if the CPU goes up just a little then its going to still affect anything you do with the PC even very minute differences
 
So i got 1:1 FSB:ram, @ 240mhz, from 200mhz stock. Im surprised my memory went above 200mhz at all.
Super Pi calculation was sped up about 18%, same with some video encoding using convertxtodvd.
@ 245mhz with or without memory divider i was gettin an error in prime95 within around 10 minutes. That was at 1.5v, (+.15v) and i didnt really want to push voltage higher than that, the temp was reaching 55c, and im on stock cooling so im happy with 240mhz 1:1 fsb:ram. 2.65 ghz from 2.2
 
Status
Not open for further replies.
Back
Top Bottom