Q6600 @ 3.3ghz and above on AIR owners:

[krazyq]

Vcore is 1.537
NB is at +.2v
ram is at 2.0v 5-5-5-15 1:1

you got the same board as me...the only volt options i see is
mch, fsb and pci..and ofcourse cpu.
is nb mch or am i mistaken here?

 

[b1gapl]

The NB is part of the chipset.

 

[krazyq]

The NB is part of the chipset.

o alright...
nb=north bridge...right?

 

[b1gapl]

o alright...
nb=north bridge...right?

Correctamundo.

 

[krazyq]

Correctamundo.

wen he said he raised the nb by .02, was he talkinb about fsb or mch then?

and is it true if you raise too much voltage, your pc has more chance of being unstable.

 

[b1gapl]

wen he said he raised the nb by .02, was he talkinb about fsb or mch then?

and is it true if you raise too much voltage, your pc has more chance of being unstable.

When he mentioned the NB, it's the MCH. But I usually increase or decrease the MCH and FSB together.

I'm not sure about that, but too much of anything isn't good. The cut off point for air, IMO, is around 1.55v.

 

[krazyq]

When he mentioned the NB, it's the MCH. But I usually increase or decrease the MCH and FSB together.

I'm not sure about that, but too much of anything isn't good. The cut off point for air, IMO, is around 1.55v.

how do i find out what the current volt of the nb is? all i see is +.01 etc etc.

 

[b1gapl]

how do i find out what the current volt of the nb is? all i see is +.01 etc etc.

I read on the DS3R, that the max voltage on the NB is 1.55v. So at +0.1v, it would be 1.35v.

 

[krazyq]

I read on the DS3R, that the max voltage on the NB is 1.55v. So at +0.1v, it would be 1.35v.

thanks !