Guess what I OC I got with my Proc !

[Disillusion]

use the dual core version of orthos to test stability, because if you use prime95, you have to make two versions with 2 affinities to stress both cores. Therefore it is just easier to use orthos (self explanatory, just hit go/start and you are off)

Not true, there's already a Prime95 out that takes advantage of multi core CPUs.

http://mersenne.org/gimps/P95V253.ZIP


Works perfectly on my Q6600, utilizing every core to 100%.

 

[LeftEyeBlind]

Got mine stable at 2.92 this morning, Bios says voltages are 1.7 and it showed a temp of 29C (which is odd, because the other day I was jacking up the voltage and things got really hot, I did clean my heatsink afterwards though).

I really do need an aftermarket cooler, and I program to accurately read brisbane temps in windows.

I'll try to Orthos it tonight. Woot for getting a 1Ghz overclock.

 

[Peter.Cort]

i never had a e2180. i had an e4400 and then i found out that gigabyte blows monkey nuts and went amd on this build.

and im only changing mobo's cause the ecs one was no good for anything and died on me

 

[Apokalipse]

I wonder how has the record for highest, stable, AMD clock speed in these forums? Because I have my x2 6400 at 3.44ghz right now, and at 3.5ghz its a little unstable, but i can try to tweak it a bit by raising the voltages a bit.

so far I got 3465MHZ prime95 stable with my 6000+

ADX6000CZBOX
CCB8F 0714UPMW

 

[BiGyLiLuPdAmIdL]

so far I got 3465MHZ prime95 stable with my 6000+

ADX6000CZBOX
CCB8F 0714UPMW

hmm, i wonder why mine isn't stable? do you think it's my motherboard?

 

[Apokalipse]

hmm, i wonder why mine isn't stable? do you think it's my motherboard?

what's the voltage?

*edit*
my board is a Foxconn C51XEM2AA

 

[andrewsvalesen]

I got the same motherboard!..

I can't get 3dmark06 to work D:

im running vista 64bit.

 

[Apokalipse]

I got the same motherboard!..

I can't get 3dmark06 to work D:

im running vista 64bit.

That explains it.


what drivers are you using for your video card?
You can try uninstalling your video card, removing your video drivers with driver cleaner or something, and installing new ones.

Then, you can try uninstalling and reinstalling 3dmark06

 

[Nick]

cool, now try that with a Toledo core. . 1.6v baby.

nice overclock dude, are toledos good cores for overclocking? cos my new skt 939 is one

 

[andrewsvalesen]

I wonder if I would see a performance increase if I bought a black edition 5000+