BIOS/CPUZ/Asus Probe Vcore Readings

[TheGlazer]

I'm a little confused right now with my Vcore reading. I set it to 1.275 in my BIOS; but it's reading 1.296 in CPU-Z and my Asus Programs.......... What's going on? And sometimes/usually, it reads lower than what I set my Vcore to in my BIOS. Is CPU-Z/Asus programs reading wrong? BTW, my Vcore stays the same (Pretty much) in Idle/Load cause I minimized the Vdroop problem.

Any help would be very appreciated

 

[veg1992]

CPU-Z tends to read CPU Voltages wrong... but not sure about the Asus Probe tho...

 

[NosBoost300]

Asus probe is retarded.. end of story..

 

[TheGlazer]

Vernong, I thought CPU-Z was one of the most accurate tools for reading System information?

Anyways, my Vcore is now reading 1.248 on CPU-Z and Asus Probe.........

Can anybody help me with this issue?

 

[veg1992]

it is... but its a bit off with a Voltage reading

 

[OmegaWeapon]

It has to do with VDroop. Software is really not very accurate when it comes to getting these values. The only true way to know what your voltage level is at is to get a multimeter and measure it yourself.