*The Official Tech-Forums 3DMark06/03 Rankings*

Re: The Tech Forums Official 3DMark06 Top List

Nice score, thats about what my system got before overclocking. Do you know if your GTS can go any higher? You might be able to break 11.5k.
 
Re: The Tech Forums Official 3DMark06 Top List

what were your temps while running 3dmark?

My cpu temps never went above 61C when i was running at 4.1ghz. I wasnt monitoring the temps on the vid cards because they have never had any issues with temps.

4.1ghz q6600
8800GT in Sli @ 700/2000
4gb ddr2 800 @ 900mhz 4-4-3-8

All of these settings are higher than when i scored my 19634, yet somehow i only got a 17~~~ this time.
 
Re: The Tech Forums Official 3DMark06 Top List

Honestly not sure, i didnt look at the individual scores. But i just installed the 169.21 drivers and score 18570 running my stable 24/7 3.6ghz Futuremark - ORB - Result Analyzer
so i think it might be a driver issue. I'm going to reboot and do a few more tests at 3.8 and 4.0 and see if anything changes. Be back in a few with results.

edit 1) 19422 @3.8ghz and all the same settings. Starting to think the last batch of drivers were the problem. Futuremark - ORB - Result Analyzer
Going to 4.0ghz and running again.

edit 2) 4ghz run, 1.525v, exact same settings as the first 2 runs, and lost points again. 17264 Futuremark - ORB - Result Analyzer So confused.

After looking at the results of the 3.8 and 4.0 runs, i lost points across the board.

Also before anyone asks, my cpu temps never went over 62C
 
Re: The Tech Forums Official 3DMark06 Top List

11,223 | Durftard | E2180 @ 3.4Ghz | 8800GTS 320MB @ 655/1050| XP Pro 32bit | Futuremark - ORB - Result Analyzer


1.48v on stock cooler+stock paste, didnt try any higher cus orthos temps were getting kinda high... during 3dmark06 top temp was 62 though


everything the same, except score = 11426, e2180 @ 3.5ghz, new link = Futuremark - ORB - Result Analyzer

had to up voltage to 1.5... wont go past there... wouldnt boot at 3.6, and 3dmark crashed during 3.55... i want to break 11.5! lol

edit: LOL now it thinks i'm using an E4400
 
Back
Top Bottom