TheGlazer
In Runtime
- Messages
- 184
- Location
- Vancouver, BC
Hi, I've joined these forums for about 2 months now, and I finally decided to overclock my system after reading a fair amount on it.
E6400
P5B Deluxe
Crucial Ballistix 800
There's something I'm not getting or reading right. In my BIOS, I set my DDR2 to 600mhz, as my FSB is set to 300. When I open up CPU-Z, it says my Frequency is 300mhz. Shouldn't it read 600? Since that's what I set it to in the BIOS............ or does the CPU-Z automically divide w/e you set in the BIOS by 2? Ex. 800mhz in BIOS = 400mhz in CPU-Z??
Oh yea, one more thing; what temperatures are considered good for Idle and Load after overclocking?
Thanx for your help and time.
E6400
P5B Deluxe
Crucial Ballistix 800
There's something I'm not getting or reading right. In my BIOS, I set my DDR2 to 600mhz, as my FSB is set to 300. When I open up CPU-Z, it says my Frequency is 300mhz. Shouldn't it read 600? Since that's what I set it to in the BIOS............ or does the CPU-Z automically divide w/e you set in the BIOS by 2? Ex. 800mhz in BIOS = 400mhz in CPU-Z??
Oh yea, one more thing; what temperatures are considered good for Idle and Load after overclocking?
Thanx for your help and time.