csaefong
In Runtime
- Messages
- 305
- Location
- Tech-Forums
Well i just got my zalman9500 and i was wondering how to overclock my q6600 g0 to 3.0 ghz
Help with ocing q6600
- Thread starter csaefong
- Start date
- Status
peterhuang913
Retired.
- Messages
- 8,076
- Location
- .
You need to get into the BIOS when you boot-up. Refer to the manual for the key to press. The manual should also tell you how to overclock. You need to change something like FSB to a higher number.
Ste
Do not Stare at my Avatar
- Messages
- 9,578
- Location
- Upon Gleaning Infinity
Your complete overclocking guide.
http://www.tomshardware.com/forum/240001-29-howto-overclock-quads-duals-guide
http://www.tomshardware.com/forum/240001-29-howto-overclock-quads-duals-guide
csaefong
In Runtime
- Messages
- 305
- Location
- Tech-Forums
I know to change the fsb i just need to know by how much.
Ste
Do not Stare at my Avatar
- Messages
- 9,578
- Location
- Upon Gleaning Infinity
Clock it to 3 Ghz on stock voltages. It should be able to do this.
If not already done, make RAM speed double the FSB.
Loosen RAM timmings to 5-5-5-15.
If not already done, make RAM speed double the FSB.
Loosen RAM timmings to 5-5-5-15.
csaefong
In Runtime
- Messages
- 305
- Location
- Tech-Forums
wait double the ram speed how would that help oc my cpu?
Ste
Do not Stare at my Avatar
- Messages
- 9,578
- Location
- Upon Gleaning Infinity
You misunderstand. Your setting a Multiplier for the RAM in relation to the FSB. It is highly reccomended that you set the multiplier to where the RAM speed is double the FSB you set. (Not the final FSB Speed)
For example. Lets you set a 3 GHz clock
334X9 is what you set for the CPU speed.
Therefore the RAM speed will be 334X2.
You would understand if you read that guide I posted.
MetalOwns
In Runtime
- Messages
- 432
- Location
- Franklin, WI
It will underclock it, and it won't restrict your CPU overclock.
- Status
