I am wondering if this PC Probe II by ASUS which came with this board actually shows the stock settings. It shows the nominal value settings in the configure screen, and then shows the actual settings and % difference of nominal on the monitor screen. It also warns you if you raise the voltage above a predetermined percentage. I will play with it and see what happens. I still don't get why I set the V Core at 1.35v, but it is running at 1.28v. I think that is the main reason I can not get it to run 400x9. It is running 350x9 atm, and I have had it start and run at 375x9, but not real stable, and at 360x9 is when it crashed after folding for 12 hours. I guess this is one of those try it and learn, and then try again things. I do appreciate your help. I learn something new every time some one speaks on this forum.