florida402
Solid State Member
- Messages
- 7
Ok I trying to update my older computer all I want to do is surf the net and do so word processing nothing fancy, so I bough this:
CASE ANTEC|WKSTN TOWER SX835II
MB SHUTTLE|AN35N-ULTRA RETAIL
DDRAM 512M|PC-3200 991093 MUSHKIN
CPU THERMAL PASTE OCZ ULTRA 5+
I already have this in the old system and will transfer them to the new system:
Video card (don’t know the brand)
Amd t-bird 1200 processor and heat sink and fan
cd-rw drive
floppy drive
dvd drive
I have install and check everything before turning on the new system. The first time I turn it on, I see that it said it is at safe mode and it said that I have to go into the bios and change the frequency of the processor and or change the frequency of the ram memory. Once I went into the bios and set the memory for (auto) detecting. I save and reboot. Once reboot, the monitor would not come on (dead), the fans are working but no picture. Turn every thing off and unplug the computer and felt the heat sink and it was quite warm so I took the heat sink off the processor and re-paste with new compound and put it back on the processor and restart the computer. It restart and again in safe mode and it wanted me to go to set up the bios. I control/alt/delete just to see if it would start up again and it didn’t. Dead, no picture.
Does anyone have a suggestion?
Thanks
CASE ANTEC|WKSTN TOWER SX835II
MB SHUTTLE|AN35N-ULTRA RETAIL
DDRAM 512M|PC-3200 991093 MUSHKIN
CPU THERMAL PASTE OCZ ULTRA 5+
I already have this in the old system and will transfer them to the new system:
Video card (don’t know the brand)
Amd t-bird 1200 processor and heat sink and fan
cd-rw drive
floppy drive
dvd drive
I have install and check everything before turning on the new system. The first time I turn it on, I see that it said it is at safe mode and it said that I have to go into the bios and change the frequency of the processor and or change the frequency of the ram memory. Once I went into the bios and set the memory for (auto) detecting. I save and reboot. Once reboot, the monitor would not come on (dead), the fans are working but no picture. Turn every thing off and unplug the computer and felt the heat sink and it was quite warm so I took the heat sink off the processor and re-paste with new compound and put it back on the processor and restart the computer. It restart and again in safe mode and it wanted me to go to set up the bios. I control/alt/delete just to see if it would start up again and it didn’t. Dead, no picture.
Does anyone have a suggestion?
Thanks