Kurt Rambis
Solid State Member
- Messages
- 19
Okay.. here's what i have going on:
My e2180 will get close to 3ghz on stock voltage. Past 3 I really have to crank up the vCore to get it stable. So I changed the modifier from 10x to 9x and increased the fsb. Right now I'm stable at:
(350 x 9) 3.150Ghz vcore = 1.4215v fsb = +.1v
NB = +.2v
DRAM = +.4v
Memory is 4-4-4-12 @700mhz 1:1 ratio.
So right now my memory is underclocked but in a 1:1 ratio. Would it be better to change the ratio from 1:1 and go for like 800+ mhz on my ram ? If so what ratios work best with my system ?
sry i'm a noob.
My e2180 will get close to 3ghz on stock voltage. Past 3 I really have to crank up the vCore to get it stable. So I changed the modifier from 10x to 9x and increased the fsb. Right now I'm stable at:
(350 x 9) 3.150Ghz vcore = 1.4215v fsb = +.1v
NB = +.2v
DRAM = +.4v
Memory is 4-4-4-12 @700mhz 1:1 ratio.
So right now my memory is underclocked but in a 1:1 ratio. Would it be better to change the ratio from 1:1 and go for like 800+ mhz on my ram ? If so what ratios work best with my system ?
sry i'm a noob.