Build Status

Status
Not open for further replies.

Invisible

MetalHead Techie
Messages
2,912
Location
Minnesota
Well i recieved all my parts except HDD cuz the order went void :/
and i mounted the tuniq but it slightly touches the side fan, just slightly though
should i be worried?
i'll post pics in the next couple days when i finish this up
 
hm, cant see a reason to be seriously worried. If anything it might just make it a bit more noisey I'd think.
 
wow call me a noob
i'm totally confused by the fan wires....i have like 9
also the psu cords i don't know where to put them
is their like a guide?
i got my psu, dvd drive, motherboard, tuniq tower, and HD mounted so this is like my last thing
 
24 pin cable goes to the 24 pin on the motherboard. The 4/8 pin goes to the 4/8 pin on the motherboard. Anything that is IDE is going to have a molex connector (i'll let you google that) and anything sata is going to have the little L shaped power connector. As far as fans go i have all of my fans running off of the psu with molex connections rather than deal with plugging them all into the fan headers on the board.
 
does it even POST?

make sure you dont have any molex connectors touching the case. i had one do it to me, and mine wouldn't POST.
 
Make sure all components are securely in place/seated correctly. Do the fans spin? Does anything come on at all (eg, the power light, etc.).
 
Status
Not open for further replies.
Back
Top Bottom