warlockben
Baseband Member
- Messages
- 31
- Location
- canada
Hi all.
Frist of all i got the evga 680i sli a1 and the Q6600 and wish to oc it.
The Q6600 is the b2 ver , Right now my bioss is set to the defult settings .
And my temps are like cup 68c in the bioss it that to hot and what can i do
to get it cooler.
Dose it have some thing to do with the voltage setting in the bioss is so can some one
tell me what to put them at for my sysem specs (cpu/fsb/mem/spp/mcp/ht) i will list them.
i would like to get over 3.g for the Q6600 if i can.
And one more thing i got 4gigs of patroit pc-2 8500 1066mhz should i change the memory
time settings legecy setting. It says its 5/5/5/9 2.3v 1066mhz and in the bioss it says it 5/5/5/14 1.4v 800mhz do i need to fix this .
Here are my specs
evga 680i sli a1
evga 8800 ultra
patroit 8500 like to oc
raptor 150
zalman cnps9500 led cpu cooler
Q6600 want to oc
corsair 620 watt
bioss up dated to p31
vista 32
And is there any thing i need to deable in the bioss befor i oc it .
Well thanks to all that read my post / And a big thanks to the ones that help me
i just hope you all dont turn your haed and no one helps me out.
disabled what i needed in the bioss.
i set my fsb to 1433 it at 9x it gives me 3.23ghz.
my voltage are cpu 1.3/fsb auto 1.4/mem2.3/spp auto1.4/ mcp auto1.5/ ht auto1.2
MEM(ddr),mhz 1066 /
Memory timing setting expert(/5/5/5/9 2t) advanced mem setting (4/29/6/10/7.8uS
core temp readings are tjunction 100c/core 0 47.c/core 1 44.c/
core 2 43.c/core 3 46.c
if i go any higher then 1433 i get the bule screen of death .
it says memory dump .
Frist of all i got the evga 680i sli a1 and the Q6600 and wish to oc it.
The Q6600 is the b2 ver , Right now my bioss is set to the defult settings .
And my temps are like cup 68c in the bioss it that to hot and what can i do
to get it cooler.
Dose it have some thing to do with the voltage setting in the bioss is so can some one
tell me what to put them at for my sysem specs (cpu/fsb/mem/spp/mcp/ht) i will list them.
i would like to get over 3.g for the Q6600 if i can.
And one more thing i got 4gigs of patroit pc-2 8500 1066mhz should i change the memory
time settings legecy setting. It says its 5/5/5/9 2.3v 1066mhz and in the bioss it says it 5/5/5/14 1.4v 800mhz do i need to fix this .
Here are my specs
evga 680i sli a1
evga 8800 ultra
patroit 8500 like to oc
raptor 150
zalman cnps9500 led cpu cooler
Q6600 want to oc
corsair 620 watt
bioss up dated to p31
vista 32
And is there any thing i need to deable in the bioss befor i oc it .
Well thanks to all that read my post / And a big thanks to the ones that help me
i just hope you all dont turn your haed and no one helps me out.
disabled what i needed in the bioss.
i set my fsb to 1433 it at 9x it gives me 3.23ghz.
my voltage are cpu 1.3/fsb auto 1.4/mem2.3/spp auto1.4/ mcp auto1.5/ ht auto1.2
MEM(ddr),mhz 1066 /
Memory timing setting expert(/5/5/5/9 2t) advanced mem setting (4/29/6/10/7.8uS
core temp readings are tjunction 100c/core 0 47.c/core 1 44.c/
core 2 43.c/core 3 46.c
if i go any higher then 1433 i get the bule screen of death .
it says memory dump .