e6300 overclock IRRITATION!

[gurusan]

Well I think that its the mobo. I tried to get 3GHz with the 6 multi and it didnt POST, although I can get 3.3 with a 7 multi with the same volts.

This means that its the mobo, correct?

The fact that itsalso unstable with a 475MHz FSB on a 6 multi confirms that its the board.

Not specifically. I would run memtest just to rule out the ram even if it's running very high timings..

Then bump the FSB up to 501 or something. Could just be a fsb hole.