Vaanish
Fully Optimized
- Messages
- 1,693
- Location
- Yorkshire, UK
I am currently running 471MHz FSB with my setup (specs in sig) with 1.4V to the processor.
Now if I want to go to 475MHz FSB, it is totally unstable. I up my chipset voltages (NB by 0.15V, SB by .1 V, SB I/O by 0.2V and FSB by 0.1 V) I would say thats substantial. I also up my vCore from 1.4 to 1.475V, still unstable. I am sure its not my RAM because its running at something like 8-8-8-24 (i did this to count out it being my RAM that was not up to scratch)
Is this a FSB hole problem? Or will my mobo just not go any further, despite the voltages I use?
4MHz more should be surely obtainable through so much more voltage I would have thought?
Thanks.
Now if I want to go to 475MHz FSB, it is totally unstable. I up my chipset voltages (NB by 0.15V, SB by .1 V, SB I/O by 0.2V and FSB by 0.1 V) I would say thats substantial. I also up my vCore from 1.4 to 1.475V, still unstable. I am sure its not my RAM because its running at something like 8-8-8-24 (i did this to count out it being my RAM that was not up to scratch)
Is this a FSB hole problem? Or will my mobo just not go any further, despite the voltages I use?
4MHz more should be surely obtainable through so much more voltage I would have thought?
Thanks.