MSI P35 Plat Chipset e6300 safe volts?

[Vaanish]

Im wanting to clock my cpu a bit higher and im just wondering what are the max voltages you would put to the nb/sb/fsb and cpu to without frying them. Im not wanting to go right to the edge of safety, im just wondering what would be a large enough increase to be noticed when overclocking but not too much to damage my components?

Im hoping to hit my aim of a 500 FSB, which will be 3.5GHz, though it would be good if I could get a little higher.

 

[b1gapl]

I would say 1.55 is the safe limit. 1.6 is max, depending on the temperature. But 1.6 isn't really recommended for 24/7 use. The most I use for 24/7 use, is 1.5v.

 

[Vaanish]

Oh thats good because im on 1.325 now with a 470MHz FSB. How much juice do you have to the FSB/NB/SB?

 

[b1gapl]

At this moment, I have my chipsets, set to 1.45v

 

[gurusan]

Oh thats good because im on 1.325 now with a 470MHz FSB. How much juice do you have to the FSB/NB/SB?

Very nice...the B2 steppings are quite good. I miss mine.

 

[Vaanish]

Very nice...the B2 steppings are quite good. I miss mine.

Yes I didnt think that it would be this easy.

I am scared about feeding too much voltage through my XMS2 though. Does anyone know if they will work with 2.2v?

 

[Preacher]

YAY for E6300 b2 stepping i got one too ! Can't wait to buy new RAM in 2 weeks !

 

[b1gapl]

Yes I didnt think that it would be this easy.

I am scared about feeding too much voltage through my XMS2 though. Does anyone know if they will work with 2.2v?

Your sticks are rated for 2.1v

 

[Preacher]

Vanish , whats your VCore at now ?

 

[Vaanish]

Vanish , whats your VCore at now ?

Well im at 3.15GHz now and CPU-Z shows 1.296v. Im running orthos blend.

After 10 mins of orthos blend my core 1 is 39C and my core 0 is 43C.