Cheeseking25
In Runtime
- Messages
- 119
Hi. I am building a gaming system and I have a few issues. I just realized that the PSU I was going to get only has two 6-pin power connectors. I want to get a 8800GTX (which takes two 6-pins for EACH card) and SLI it in the future. The OCZ GameXtreme PSU i was going to buy only had two 6-pins. I want to switch to a PC and Cooling Silencer 750 Quad PSU (which has four 6-pins). Will the cables be long enough on this PSU and will it fit in my case and work with all my components? (see specs below) Why is there one 60V rail and does it make a difference? Also, I have just learned that the RAM I was going to get is only partially supported by my mobo (2 sticks wont work in dual channel but 4 will...). Anyway, I want to get Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) which is supported fully. Will this be enough for gaming on Vista or should I get 4GB? (ill be using 32-bit but I think the system will still use all 4GB, only 3GB can be used for applications tho...) Will all of these components work together with my system? Any help is appreciated.
Case: Antec 900 ATX
CPU: Q6600 (plan to oc it to 3GHz)
PSU: Silencer 750 Quad (switching from OCZ GameXtreme 700W)
Mobo: ASUS P5N32-E SLI
Vid. Card: 8800 GTX (plan to SLI in the future)
Memory: 2GB Crucial Ballistix DDR2@800MHz (switching from 2GB Corsair XMS2 800MHz)
HD 1: Raptor 10000RPM 150GB
HD 2: Seagate 7200RPM 320GB
DVD: Two 20x DVDRW w/lightscribe
OS: Vista Home Premium (32-bit)
Case: Antec 900 ATX
CPU: Q6600 (plan to oc it to 3GHz)
PSU: Silencer 750 Quad (switching from OCZ GameXtreme 700W)
Mobo: ASUS P5N32-E SLI
Vid. Card: 8800 GTX (plan to SLI in the future)
Memory: 2GB Crucial Ballistix DDR2@800MHz (switching from 2GB Corsair XMS2 800MHz)
HD 1: Raptor 10000RPM 150GB
HD 2: Seagate 7200RPM 320GB
DVD: Two 20x DVDRW w/lightscribe
OS: Vista Home Premium (32-bit)