Gskill Hz 5-6-6-19!?

[BlueHeaven]

Grats!!

 

[veedubfreak]

Ya im currently running with everything back at default speeds just due to the heat output. Once the weather stays consistently below 70 i'm going to crank it back up to 3.6ghz 1:1 @4-4-4-12. The fun part is, everything is running fast already, so when i reoverclock its like i get a free upgrade!

 

[g2k556]

gigabyte really needs to put that ctrl+F1 exists somewhere in the manual.

 

[mnelson07]

gigabyte really needs to put that ctrl+F1 exists somewhere in the manual.

Just wanted to let everyone know that the Ctrl+F1 actually is in the P35-DS3R motherboard manual. I have Revision 1002 and it's on page 35 which is section 2.2 "The Main Menu" under "Note" at the bottom of the page. It reads as follows:
"If you do not find the setting you want in the Main Menu or a submenu, press <Ctrl>+<F1> to access more advanced options."

 

[mgcook]

did you try to unlink the RAM and manually set them?

i would try 5-5-5-15..intel CPUs like loose timings

 

[mnelson07]

Yeah, I tried 5-5-5-15. Still had to keep a volt of around 1.39-1.41 to get it to boot. I'll mess with it more soon.

 

[mgcook]

recommended voltage to the RAM is 2.1-2.2V

so you need to bump it up

 

[mnelson07]

I was at 2.1, I'll do 2.2v and 5-5-5-15 when I go for 3.6GHz