I have 4 sticks of DDR2 G. Skill RAM (2 sets of dual channel)
I ran memtest on the first set and it ran great...with the second set the first time it just froze and showed a red line across the error reporting section...
I rebooted and tried it again to see if i could get anything more and i got the following output...
Unexpected Interrupt - Halting
Stack:
Type: Inv_Op eax: 00000000 0001a6e0 000196b0 0001a710 0000f43c
PC: aa00976f ebx: 000196b0 0001a6e4 00000000 0001a714 00000026
CS: 00000010 ecx: 00000000 0001a6e8 00000006 0001a718 00000001
Eflag: 00010046 edx: 00000027 0001a6ec 00000000 0001a71c 000067c7
Code: 00000000 edi: 02100000 0001a6f0 aa00976f 0001a720 00000001
esi: 00000000 0001a6f4 00000010 0001a724 00000026
ebp: 00000001 0001a6f8 00010046 0001a728 7ed14f00
esp: 0001a6e0 0001a6fc 000097ff 0001a72c 00100000
0001a700 0001a7cc 0001a730 0000000a
CS:EIP: ff ff ff ff ff ff ff ff ff ff 0001a704 00000000 0001a734 00100000
0001a708 0001a7cc 0001a738 02100000
The error count says 0 errors but what does this mean?
I ran memtest on the first set and it ran great...with the second set the first time it just froze and showed a red line across the error reporting section...
I rebooted and tried it again to see if i could get anything more and i got the following output...
Unexpected Interrupt - Halting
Stack:
Type: Inv_Op eax: 00000000 0001a6e0 000196b0 0001a710 0000f43c
PC: aa00976f ebx: 000196b0 0001a6e4 00000000 0001a714 00000026
CS: 00000010 ecx: 00000000 0001a6e8 00000006 0001a718 00000001
Eflag: 00010046 edx: 00000027 0001a6ec 00000000 0001a71c 000067c7
Code: 00000000 edi: 02100000 0001a6f0 aa00976f 0001a720 00000001
esi: 00000000 0001a6f4 00000010 0001a724 00000026
ebp: 00000001 0001a6f8 00010046 0001a728 7ed14f00
esp: 0001a6e0 0001a6fc 000097ff 0001a72c 00100000
0001a700 0001a7cc 0001a730 0000000a
CS:EIP: ff ff ff ff ff ff ff ff ff ff 0001a704 00000000 0001a734 00100000
0001a708 0001a7cc 0001a738 02100000
The error count says 0 errors but what does this mean?