DP35DP suggestions?!

[cfgcjm]

Ok so hears the story...I bought a motherboard form intel...DP35DP. I asked them about the memory that i had and if it was ok and they said "yeah, sure!". Well now it comes out that it's not...I would like 4 x 1Gb Stick...My Board requires the following:

DDR2 667 or 800mhz (Pref 800mhz) Dual Channel

Timings:
TCL : 5
TRCD: 5
TRP: 5

Voltage: 1.8v ONLY

I really need suggestions

 

[peterhuang913]

What is the model number of the board?

Newegg.com - A-DATA 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail

 

[cfgcjm]

It's an Intel DP35DP

 

[peterhuang913]

It's an Intel DP35DP

OIC, you must excuse my ignorance.

 

[cfgcjm]

I've never heard of A-Data...are they reliable

 

[b1gapl]

They're good as value ram. I suggest these instead...:
Newegg.com - G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail

 

[cfgcjm]

I like those but i have one question...it's voltage is listed as 1.8V - 2.0V

For my board, the Intel site states "1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts"

Is the fact that the ram says 1.8V-2.0V vs the 1.8V (only) going to pose an issue?

Unfortunately the board is "too new" to have a compatible memory list...sorry for the basic questions.

 

[b1gapl]

Is the fact that the ram says 1.8V-2.0V vs the 1.8V (only) going to pose an issue?

No, it does not. When you install them, they should automatically be set to the standard voltage. Which is 1.8v.