Rate the Wire Management Above You!

[peterhuang913]

Wow, this thread is very busy.

 

[Nick]

i didnt realise how quickly this thread would fill up i mean 56 pages!

 

[rebell07]

lol but the old forgoten one is at 116 i think lol
pics will be up in about 5 mins

 

[rebell07]

ok this is my fist and newest build
just built it yesterday
the wiremanagement is ok but there is noway to put the cables
so here goes

1.

2.

3.

4.

c&c please thanks

 

[commandercup]

flip the hard drives, trim the ziptie tips a close as possible

stuff the cables on the right into the 5.25 drive bay areas so they are hidden

also... move the cathode, its lighting up all the wires which would only be cool if the were UV so put it at the bottom or stuff the wires away

looks decent I'd say 6.5/10

 

[rebell07]

ok the hdd cant trun around tried it
the wires are so tight i cant stuff them in the bays
and i should put the light at the bottom you say?

 

[rebell07]

ok i was wondering if i should move my opt drive down so i could try and stuff the wires in but they are so tight so i probs wont work

 

[commandercup]

I don't think that would matter

if anything, take off that zip tie thats holding all the wires together and stuff them in indivually since not all of them will be tight

yeah, move the cathode to the bottom if you can't move the wires since the the black mesh on the wires will camoflauge it when the case is dark inside

 

[Nick]

woah that SATA connecter on your HD looks like its gonnasanap the connecter

 

[rebell07]

ill move it up lol