Alexinator
In Runtime
- Messages
- 347
This is the second time I've had to type this up thanks for Mozilla crashing ><
Anyways, I've spent the last few days tuning my system, and think I'm happy with the current results. Take a look:
(All temps with an ambient of 22°C Outside Case, and 27°C Inside Case)
CPU
E6600 Conroe. Stock: 2.4 GHz @1.21vCore. (Cooled With: Cutom DangerDen Water Cooling system).
vCore: 1.65v
Speeds:
FSB: 431.3
Rated FSB: 1725.0
Multi: x9
Clock: 3,881 MHz (3.9 GHz)
Temps: (Idle/Load)
CPU: 33°C/57°C
Core0: 32°C/56°C
Core1: 31°C/54°C
(The load temps are from running Orthos, which means those aren't ever seen outside of Orthos testing. They never get that high during games and such, usually stay around 45°C)
GPU:
eVGA 8800GTX. Stock: Core: 576 Mem: 900. (Cooled With: Stock Cooler)
Speeds:
Core Clock: 632
Memory: 1050 (Double Data Rate 2100)
Temps:
Idle: 56°C
Load: 79°C
Memory:
G.Skill 2GB PC6400 (800 MHz) Dual Channel Kit (Cooled With: OCZ Memory Cooler)
Speeds:
Frequency: 431.3 MHz
FSBRAM Ratio: 1:1
CAS Latency: 4
RAS to CAS Delay: 4
RAS Precharge: 4
Cycle Time: 12
Command Rate: 2T
(4-4-4-12)
Temps:
Idle: 26°C
Load: 31°C
And there you have it! Most BIOS setting are Auto (Striker Extreme mobo) Accept for the RAM Timings, vCore voltage, FSB, and Memory speed.
Any questions/comments/suggestions?
Anyways, I've spent the last few days tuning my system, and think I'm happy with the current results. Take a look:
(All temps with an ambient of 22°C Outside Case, and 27°C Inside Case)
CPU
E6600 Conroe. Stock: 2.4 GHz @1.21vCore. (Cooled With: Cutom DangerDen Water Cooling system).
vCore: 1.65v
Speeds:
FSB: 431.3
Rated FSB: 1725.0
Multi: x9
Clock: 3,881 MHz (3.9 GHz)
Temps: (Idle/Load)
CPU: 33°C/57°C
Core0: 32°C/56°C
Core1: 31°C/54°C
(The load temps are from running Orthos, which means those aren't ever seen outside of Orthos testing. They never get that high during games and such, usually stay around 45°C)
GPU:
eVGA 8800GTX. Stock: Core: 576 Mem: 900. (Cooled With: Stock Cooler)
Speeds:
Core Clock: 632
Memory: 1050 (Double Data Rate 2100)
Temps:
Idle: 56°C
Load: 79°C
Memory:
G.Skill 2GB PC6400 (800 MHz) Dual Channel Kit (Cooled With: OCZ Memory Cooler)
Speeds:
Frequency: 431.3 MHz
FSBRAM Ratio: 1:1
CAS Latency: 4
RAS to CAS Delay: 4
RAS Precharge: 4
Cycle Time: 12
Command Rate: 2T
(4-4-4-12)
Temps:
Idle: 26°C
Load: 31°C
And there you have it! Most BIOS setting are Auto (Striker Extreme mobo) Accept for the RAM Timings, vCore voltage, FSB, and Memory speed.
Any questions/comments/suggestions?