New Quad 3DMark Results

[pinoy3000]

Comparison between my E6600 OC'ed to 3.2GHz vs Q6600 Stock Speed. Both GPU are the same clock speed and are not overclocked, just stock.

E6600 @ 2.4GHz Stock Result - 8362
Futuremark - ORB - Result Analyzer

E6600 @ 3.2GHz Result - 8882
Futuremark - ORB - Result Analyzer

Q6600 @ 2.4GHz Result - 9288
Futuremark - ORB - Result Analyzer


406 Points Difference mainly all from CPU. But 926 Points Difference between stock E6600 vs stock Q6600.

Does this sound right?

 

[peterhuang913]

How do you get a result analyzer link?

 

[pinoy3000]

How do you get a result analyzer link?

What do you mean? Anyway gonna overclock my new CPU to 3.0GHz.

It seems to me that Everest is reading the temps 15C higher, SpeedFan reads it more accurately, 15C lower than Everest The Cores but both CPU Temps are the same, the cores are different. Everest is 15C higher than SpeedFan.

 

[peterhuang913]

Maybe Speedfan is wrong and Everest is correct.

 

[mgcook]

speedfan only had a TJunction of 85*

Quads use a 100TJunction. So add 15* to speedfan.

I use Coretemp to monitor my temps.

 

[pinoy3000]

speedfan only had a TJunction of 85*

Quads use a 100TJunction. So add 15* to speedfan.

I use Coretemp to monitor my temps.

So Quads are supposed to run hot? My temps goes up to 71C I just overclocked it to 3.2GHz 400MHz FSB x 8 Multiplier. And each core temps goes to around 71C but the CPU temp doesnt go higher than 62C, it goes to like 61C.

Is this safe to overclock? My VCore at 400MHz x 8 Multiplier is at 1.375 Volts. I havent tried going to 1.3625 Volts yet. But I tried 1.335 Volts but it crashed hehe with full load on each cores.

 

[peterhuang913]

71c is pretty high and unsafe.

 

[mgcook]

71* is the recommended limit by Intel

I ran mine for over 8hours at 70,70,66,66

 

[pinoy3000]

Wow, ok, at BIOS it was like 49C at my overclocked settings at 3.2GHz, I guess I wont OC it?

Right now at Stock Settings, Im not doing any load the the CPU at all and here are the temps reading from Everest.
Motherboard: 35C
CPU: 38C
CPU#1/Core#1: 48C
CPU#1/Core#2: 49C
CPU#1/Core#3: 45C
CPU#1/Core#4: 46C
GPU: 52C
GPU Diode: 49C
GPU Memory: 52C
Seagate HD: 30C
WD Raptor HD: 30C
CPU: 2150 RPM
Chassis #3: 1507 RPM
GPU: 1494 RPM
CPU Core: 1.22V

These are stock settings!
Those I think are too high temps for not doing anything. Im just typing this message here and those are the temps for it on Everest.

 

[peterhuang913]

What's room temperature?