Just ran ATITool and the default clocks for my card were
540mhz core
700mhz memory
I ran the max core, and max memory setting, and i got the core to around 700mhz before i started getting yellow lines on the graphic, and i got the memory to around 870mhz before i started getting yellow lines/dots on my graphic.
So i set the 2d core as 540 core clock, and the memory to 850mhz.
I set the 3d low power core to 600mhz, and the memory to 850mhz.
I set the 3d perf. core to 680mhz, and the memory to 850mhz.
the temp readings were around 79-81 when i did the "find max core, and find max memory".
Ill run orthos overnight and see if anything unusual happens, but orthos does not test my graphics card right?
540mhz core
700mhz memory
I ran the max core, and max memory setting, and i got the core to around 700mhz before i started getting yellow lines on the graphic, and i got the memory to around 870mhz before i started getting yellow lines/dots on my graphic.
So i set the 2d core as 540 core clock, and the memory to 850mhz.
I set the 3d low power core to 600mhz, and the memory to 850mhz.
I set the 3d perf. core to 680mhz, and the memory to 850mhz.
the temp readings were around 79-81 when i did the "find max core, and find max memory".
Ill run orthos overnight and see if anything unusual happens, but orthos does not test my graphics card right?