Peter.Cort
TF's First Dry Ice User!
- Messages
- 5,018
- Location
- Boston, MA
ok, so got my comp finally, and the wire work was a joke, so i go and fix it, and put in 3 more HD's, all on slave, put in a IDE PCI card to hook up my 3 cd drives, and thats it. Go to start up, all the fan's light up, cathode lights up, cpu fan goes, hd's buzz do thier startup thing, and the monitor gives me the "No Signal." I've gotten this before, so i try a new monitor, same thing, new gfx card with both monitors, same thing, onboard gfx with both monitors, same thing. I thought that it was too much power going to different things, so i unplugged everything except the 20 pin and 4 pin connectors, put in the master hd and started it up, nothing. Reset the CMOS nothing. Took the master drive put it in a different computer, it ran off it. Tried a fail save HD w/ windows on it, nothing. So WTF IS HAPPENING!!! I just RMA'd the mobo and got it back... i'm thinking its the mobo, and i sincerly hope its not, but if it is then no biggie.
also i put in a new mobo, older kind, that worked before i connected all the other stuff, and it gave me 2 beeps. and the screen still didn't show, but if its a POST test thingy then 2 beeps are a parity circuit failure. So can someone explain that to me ?
also i put in a new mobo, older kind, that worked before i connected all the other stuff, and it gave me 2 beeps. and the screen still didn't show, but if its a POST test thingy then 2 beeps are a parity circuit failure. So can someone explain that to me ?