So yeah now comes time for me to put the power LED/power SW/Hard drive LED/reset SW/Speaker etc pins into the mobo. Problem is I can't tell whats the positive or negative wires to put them in their pins. The manual says to be sure to match up the + or negative. I mean on the black plastic for the wire itself it shows an Arrow usually next to a red wire, and a G for the other wire ( mostly black but sometimes white or something ). Is it safe to assume the arrow means positive?
EDIT: I guess I'll just go with this statement: " Pay attention to positive and negative pins on the header; you need to attach the leads so that the colored wire is over the positive pin and the white wire is over the negative (or ground) pin. "
found here: Smart Computing Article - Best Budget Linux Server Under $500
EDIT: I guess I'll just go with this statement: " Pay attention to positive and negative pins on the header; you need to attach the leads so that the colored wire is over the positive pin and the white wire is over the negative (or ground) pin. "
found here: Smart Computing Article - Best Budget Linux Server Under $500