Delta to Tjunction temp question.

Status
Not open for further replies.
I've never seen that temperature reading, where it says "to TJunction remaining". But if it's 67-70C, that's way too hot, even for stock cooling....even if the thermal pad hasn't set in.
 
Turns off? That should be doing that. Set it to 100%, if it's not too loud.
 
I just switched the cpu fan to turn on 50% of the time when its above 20 degrees. Before it was only turning on 28% of the time when the temp was above 20 degrees.

Ill see if that changes anything.
 
ok i am setting the fan readings back to default because i noticed when i put the percentage to 50 instead of 28, the readings are now 75/70. But the regular temps went down to 15/10 instead of the normal 17/12.

any thoughts?
 
Status
Not open for further replies.
Back
Top Bottom