CPU testing

[pinoy3000]

Ye. 1.25 Volts is not enough. Even mine is 1.337, bump it to say....... 1.35 and it shouldnt have any problems.


Edit: Whats your RAM Frequency and timing? Just wanna ask cuz I might try mine at 3.2 with 400FSB and 8 Multiplier.

If I do this, what will my RAM Frequency should be? 800MHz for a 1:1 ratio or 1000MHz? and what timing?

 

[Acentric]

I have this, I'll write it down the way it shows on my BIOS.

CPU Clock Ratio: 8x
CPU Host Frequency (MHz): 400
PCI Express Frequency (MHz): 100
System Memory Multiplier (SPD): 2.00

Sorry, I don't really know the sub names for them.

 

[Acentric]

I just overclocked to 3.4! I'll test out with orthos for a while to see if its stable and check the temps, so far its reading 23C for the cpu on idle, im at 1.38v i hope it runs ok!

 

[b1gapl]

wow...excellent idle temperature! Now the load temperature...

Which Zalman are you using?

 

[Acentric]

I'm using the Zalman 9500 and I'm using it at medium speed. Heres a picture of the results I got so far, and the highest i saw the temp go was 43c.

 

[Acentric]

oh snap sorry for the double post

 

[Acentric]

i got a day running it non stop and its running stable, its like i never overclocked it at all, this new cpu is the ****, anyone who has the 200 bucks to dish out for this baby go for it, unless u can fork out enough for the q6600 with G0 stepping. otherwise this ones a winner